3年以上
本科
最近更新
559人關注
職位描述
該職位還未進行加V認證，請仔細了解后再進行投遞！
汽車零部件 質量工程師（SQE/PQE/CQE均有空缺）
主要職責Essential responsibilities and duties:
61 通過生產過程的控制，保證生產的產品質量符合客戶要求。優化過程控制，支撐生產的正常進行，并減少報廢率和返工率。Through the control of the production process, to ensure that the quality of products produced meet customer requirements. Optimize process control to support normal production and reduce scrap rate and rework rate.
主要任務The main missions of the role are:
61 參與新項目的設計/試制/導入等工作，從可行性階段到啟動后質量評估再到產品整個壽命。Participate in the design, trial-production and lead-in of new projects, from the feasibility stage to the quality assessment after startup to the whole life of products.
61 幫助進行工程的故障模式和效應分析，同時進行質量計劃活動，并監控產品整個使用壽命的狀態。Assist in failure mode and effect analysis of the project, as well as quality planning activities and monitoring of the status of the product throughout its life.
61 針對產生的缺陷，發現其產生的原因，并就控制和改進方面提出建議，參與客戶相關質量問題的分析和改進。Identify the cause of defects and make recommendations on control and improvement. Participate in the analysis and improvement of customer quality issues.
61 對所管理的人員進行指導和培訓，確保有能力勝任工作，確保操作者關于產品、POKA YOKE驗證和S/R要求都經過培訓并且掌握。Conduct coaching and training for the people under management to ensure that they are competent and that the operators are trained and master the products, POKA YOKE and S/R requirements.
61 負責對內部過程相關質量文件的編寫，執行，監控和必要的更改，確保產品和過程變更是按照指導要求，并參與P-FMEA團隊。與工作站相關的質量文件如標準化指導書、返工指導書等必需保證與控制計劃一致。Responsible for the preparation, implementation, monitoring and necessary changes of internal process related quality documents, ensuring that product and process changes are made in accordance with the instructions, and participating in the p-fmea team.Work station related quality documents such as standardized instructions, rework instructions, etc. must be consistent with the control plan.
61 負責對所有生產方法以及產品改進方法與質量標準的一致性的評估和審查。Responsible for evaluating and reviewing all production methods and product improvement methods for consistency with quality standards.
61 監控生產過程，完成和更新批量生產控制計劃并檢查控制計劃實施有效性，發現潛在的質量隱患，并在出現質量問題時及時處理，采取糾正預防措施，對于分享的S/R警報能夠培訓到班長。Monitor the production process, complete and update the batch production control plan and check the effectiveness of the implementation of the control plan, find potential quality risks, deal with quality problems in time, take corrective and preventive measures, and train the monitor for Shared S/R alerts.
61 收集并整理質量數據，制定質量報告，分析并監控產品質量趨勢。Collect and organize quality data, develop quality reports, analyze and monitor product quality trends.
61 積極參加內部客戶和外部客戶問題的QRCI及8D小組解決質量問題，保證24H圍堵完成。Actively participate in the QRCI and 8D team for internal and external customer problems to solve quality problems and ensure the completion of 24H containment.
61 完成上級交代的其他任務。Complete other task assigned by manager.
資格要求Qualifications :
理想候選人的期望/ The ideal candidate will have/be:
61 教育背景/Education: 本科學歷以上，理工科專業優先。Bachelor Degree in Engineering or Mechanical.
61 經驗/ Experience: 在汽車相關行業有至少3年的相關經驗。At least 3 years relevant experience in automotive industry.
技術和能力/ Skills and competencies:
61 語言能力/Language: 英文聽說讀寫滿足工作要求。English listening, speaking, reading and writing meet job requirements.
61 能夠遵守公司的道德規范、管理規范以及行為準則的相關要求。To comply with the company's code of ethics, the requirements of the relevant management regulations and code of conduct.
61 能夠遵守ISO14001的相關環境要求。To comply with relative environment requirements of ISO14001.
工作地點：常州市新北區韶山路
主要職責Essential responsibilities and duties:
61 通過生產過程的控制，保證生產的產品質量符合客戶要求。優化過程控制，支撐生產的正常進行，并減少報廢率和返工率。Through the control of the production process, to ensure that the quality of products produced meet customer requirements. Optimize process control to support normal production and reduce scrap rate and rework rate.
主要任務The main missions of the role are:
61 參與新項目的設計/試制/導入等工作，從可行性階段到啟動后質量評估再到產品整個壽命。Participate in the design, trial-production and lead-in of new projects, from the feasibility stage to the quality assessment after startup to the whole life of products.
61 幫助進行工程的故障模式和效應分析，同時進行質量計劃活動，并監控產品整個使用壽命的狀態。Assist in failure mode and effect analysis of the project, as well as quality planning activities and monitoring of the status of the product throughout its life.
61 針對產生的缺陷，發現其產生的原因，并就控制和改進方面提出建議，參與客戶相關質量問題的分析和改進。Identify the cause of defects and make recommendations on control and improvement. Participate in the analysis and improvement of customer quality issues.
61 對所管理的人員進行指導和培訓，確保有能力勝任工作，確保操作者關于產品、POKA YOKE驗證和S/R要求都經過培訓并且掌握。Conduct coaching and training for the people under management to ensure that they are competent and that the operators are trained and master the products, POKA YOKE and S/R requirements.
61 負責對內部過程相關質量文件的編寫，執行，監控和必要的更改，確保產品和過程變更是按照指導要求，并參與P-FMEA團隊。與工作站相關的質量文件如標準化指導書、返工指導書等必需保證與控制計劃一致。Responsible for the preparation, implementation, monitoring and necessary changes of internal process related quality documents, ensuring that product and process changes are made in accordance with the instructions, and participating in the p-fmea team.Work station related quality documents such as standardized instructions, rework instructions, etc. must be consistent with the control plan.
61 負責對所有生產方法以及產品改進方法與質量標準的一致性的評估和審查。Responsible for evaluating and reviewing all production methods and product improvement methods for consistency with quality standards.
61 監控生產過程，完成和更新批量生產控制計劃并檢查控制計劃實施有效性，發現潛在的質量隱患，并在出現質量問題時及時處理，采取糾正預防措施，對于分享的S/R警報能夠培訓到班長。Monitor the production process, complete and update the batch production control plan and check the effectiveness of the implementation of the control plan, find potential quality risks, deal with quality problems in time, take corrective and preventive measures, and train the monitor for Shared S/R alerts.
61 收集并整理質量數據，制定質量報告，分析并監控產品質量趨勢。Collect and organize quality data, develop quality reports, analyze and monitor product quality trends.
61 積極參加內部客戶和外部客戶問題的QRCI及8D小組解決質量問題，保證24H圍堵完成。Actively participate in the QRCI and 8D team for internal and external customer problems to solve quality problems and ensure the completion of 24H containment.
61 完成上級交代的其他任務。Complete other task assigned by manager.
資格要求Qualifications :
理想候選人的期望/ The ideal candidate will have/be:
61 教育背景/Education: 本科學歷以上，理工科專業優先。Bachelor Degree in Engineering or Mechanical.
61 經驗/ Experience: 在汽車相關行業有至少3年的相關經驗。At least 3 years relevant experience in automotive industry.
技術和能力/ Skills and competencies:
61 語言能力/Language: 英文聽說讀寫滿足工作要求。English listening, speaking, reading and writing meet job requirements.
61 能夠遵守公司的道德規范、管理規范以及行為準則的相關要求。To comply with the company's code of ethics, the requirements of the relevant management regulations and code of conduct.
61 能夠遵守ISO14001的相關環境要求。To comply with relative environment requirements of ISO14001.
工作地點：常州市新北區韶山路
注：聯系我時，請說是在河南人才網上看到的。
工作地點
地址：常州新北區常州佛吉亞汽車部件有限公司韶山路15號
求職提示：用人單位發布虛假招聘信息，或以任何名義向求職者收取財物（如體檢費、置裝費、押金、服裝費、培訓費、身份證、畢業證等），均涉嫌違法，請求職者務必提高警惕。
職位發布者
冷雪芹HR
上海康耐仕人力資源服務有限公司
-
中介服務
-
500-999人
-
外商獨資·外企辦事處
-
上海市長寧區鎮寧路
